An EPB electronic parking brake caliper replaces the handbrake lever, cable and slack adjuster with a motor-on-caliper unit, and on a new energy light commercial vehicle it is a system interface, not an option, freeing cab space and cooperating with regenerative braking.
How the Motor-on-Caliper Works
A motor on the caliper drives a reduction gear that clamps the pads directly, so parking force is mechanical, not hydraulic. The ECU commands a clamping force and holding stays with the ignition off; typical response is under one second (industry reference value).
Why New Energy Light Trucks Adopt It
New-energy light truck penetration reached 44.35% in September 2026 on 26,400 units, up 59% year on year, per First Commercial Vehicle Network data. Removing the hand lever frees floor space in single-cab electric vans, and heavy underfloor battery packs make hill hold essential on ramps. Auto-hold then hands over to regenerative braking at traffic lights.
What to Check Before Specifying
Five parameters decide the fit on a light truck axle: clamping force class, around 18-24 kN for this class (industry reference); a 12 V or 24 V supply; motor housing ingress protection; CAN or LIN protocol compatibility; and bracket geometry matching the rear disc brake on the drive axle. Gradient holding, usually quoted against 20-30% slopes (industry reference), must be validated with real battery mass.
Integration With the Axle Package
The caliper never sells alone: it shares the knuckle and bracket of the axle assembly, routes its harness along the axle beam, and its fail-safe logic must match the parking lamp signals. One supplier delivering caliper and axle together removes an interface risk in the commercial vehicle axle bill of materials.
How Zhucheng Yihe Axle Supplies
Zhucheng Yihe Axle Co., Ltd., in Zhucheng, Shandong, manufactures light truck front axles, drive axles, trailer axles and brake, suspension and shock absorber components, produced under an IATF 16949-compliant quality management system, as OEM programmes built to customer drawings and aftermarket EPB-compatible caliper kits.
As of 20 November 2026, on a new energy light commercial vehicle the EPB electronic parking brake caliper is bought as a system interface, and the supplier who documents clamping force, response time and fail-safe behaviour in one certified package wins the fleet contract.