News

e-Axle Sets the Platform: Daimler eCitaro Resets the Drive Axle

Nov 16,2026 

The drive axle is no longer ordered late in a vehicle programme. On 10 November 2026 Daimler Buses revealed a near-production next-generation Mercedes-Benz eCitaro at its eMobility Days in Munich: the e-axle is now chosen at platform level, before the architecture is frozen.

A Bus Platform Built Around the e-Axle

The new eCitaro uses a dedicated battery-electric platform, not a diesel-derived one. The city version runs a ZF AxTrax 2 LF e-axle with output up to 360 kW; the intercity version keeps a central motor on a Mercedes-Benz RO 440 rear axle. NMC gives way to modular LFP packs of about 50 kWh, six to twelve per rigid bus and up to fourteen per articulated bus, charging to 450 kW. LFP plus a 42 mm roof, down from 70 mm, cuts up to 750 kg on an articulated bus. Launch is set for 2028.

China Runs the Same Integration Math

Chinese OEMs ran the same math within days. On 10 November 2026 Sinotruk detailed its HOWO TX pure-electric tractor for coal routes: an e-axle layout deleting gearbox and driveshaft saves up to 500 kg, with dual- or tri-motor variants peaking at 825 kW and 75,000 N·m. At the 25th China International Engine and Components Exhibition in Nanjing, 11 to 13 November 2026, FAW Jiefang Power presented the CAR13E540, a 13-tonne heavy e-axle for express and port duty: 91% system efficiency, over 54,000 N·m per axle, B10 life of 1.5 million kilometres. New Zealand's NZ Transport Agency, meanwhile, will trial battery-electric trucks above standard axle-load limits from December 2026 to June 2028.

What It Means for a Merchant Axle Maker

For Zhucheng Yihe Axle Co., Ltd., platform-level e-axle programmes reward early co-development: a front axle is still specified on forging quality, kingpin geometry and load rating, a drive axle on gear life, ratio coverage and thermal capacity. With October commercial vehicle exports at 139,000 units, up 47.1% per CAAM data of 11 November 2026, a commercial vehicle axle family must cover several markets.

By mid-November 2026 the commercial vehicle e-axle has stopped being a drivetrain option and become a platform decision: OEMs now pick the drive axle, and the supplier behind it, before the first vehicle drawing is signed off.